Carbon steel welded construction gives strength and reggedness
and hot fused epoxy coating on all surfaces gives protection from corrosion.
Suitable for filtering water with inorganic particles where opening the flushing
port is normally sufficient to clean the filter. Cover and cross-tee are
of close-grained cast iron. The cover is easity opened without tools for
inspection. Inlet and outlet connections are available flanged and threaded
(by special order). Sizes available are 3", 4" & 6".
The body, cover and cross-tee are protected by epoxy coating,
which is applied after cleaning and chemically treating all surfaces. The
metal is heated and the epoxy powder electrostatically sprayed so it covers
all parts. As the powder hits the surface it melts to forma smooth, even
and impervious coating.
Model/Size
Dimensions (inch)
A
B*
C
D
E
75 - IMF - B - F 3"
6 5/8
7 1/2
20
24
17 5/8
100 - IMF - B - F 4"
8
9
22 1/2
24
18 5/8
150 - IMF - B - F 6"
10
11
40 3/4
30
27
* As per AWWA Std.
The
cartridge is of all welded 304 grade stainless steel construction. The woven
mesh is supported by a perforated screen 0.040" thick. Large rubber
seals are provided with 'ears' that centre the cartridge for easy re-assembly.
Flow is from inside to outside. Screens in 40, 80 & 150 mesh are available.
Rated pressure is 100 psi. Maximum pressure is 120 psi. 1/4"
pressure gauge connections are provided on inlet and outlet sides.
Carbon steel welded construction gives strength and reggedness
and hot fused epoxy coating on all surfaces gives protection from corrosion.
Suitable for filtering water with inorganic particles where opening the flushing
port is normally sufficient to clean the filter. Cover and cross-tee are
of close-grained cast iron. The cover is easity opened without tools for
inspection. Inlet and outlet connections are available flanged and threaded
(by special order). Sizes available are 3", 4" & 6". 
The
cartridge is of all welded 304 grade stainless steel construction. The woven
mesh is supported by a perforated screen 0.040" thick. Large rubber
seals are provided with 'ears' that centre the cartridge for easy re-assembly.
Flow is from inside to outside. Screens in 40, 80 & 150 mesh are available.